Wisconsin permit test: pavement markings
Yellow and white lines, passing zones, crosswalks, stop lines and special lanes. 5 questions.
You are behind a slow car on a road with double solid yellow lines. When may you cross the lines to pass it?
Keyboard: press 1–4 or A–D to answer, Enter for the next question, S to save, R to read aloud, P to pause reading, L to listen and answer.
Sample pavement markings questions

View diagram
You are behind a slow car on a road with double solid yellow lines. When may you cross the lines to pass it?
- A If it is going under half the limit and is not farm equipment
- B If it is going 10 mph or more under the limit
- C Only if it is farm equipment going under half the speed limit
- D Whenever there is no oncoming traffic in sight
Show answer
A. If it is going under half the limit and is not farm equipment
Double solid yellow lines normally mean no passing. Wisconsin allows crossing them to pass a vehicle going less than half the speed limit when it is safe, but not when that vehicle is farm equipment.
When may you cross a solid white line between two lanes?
- A Only to pass a vehicle that is going well under the limit
- B Only after signaling for at least five seconds
- C Any time no other vehicle is beside you
- D To avoid a hazard or to turn within the next block
Show answer
D. To avoid a hazard or to turn within the next block
A solid white line between lanes means you should not cross it. The exceptions are avoiding a hazard or turning within the next block.

View diagram
The center line is a solid yellow line with a dashed yellow line beside it. The dashed line is on your side. May you pass?
- A Only if the other driver signals you to pass
- B No, any solid yellow line forbids passing
- C Yes, when it is safe to do so
- D Only if you stay within the speed limit plus 10 mph
Show answer
C. Yes, when it is safe to do so
With a combination of solid and dashed yellow lines, drivers on the dashed side may pass when it is safe. Drivers on the solid side may not pass.

View diagram
What is a shared center lane used for?
- A Left turns or U-turns by traffic from either direction
- B Parking briefly to load or unload
- C Merging onto the road before speeding up
- D Passing slower vehicles whenever the center lane is clear
Show answer
A. Left turns or U-turns by traffic from either direction
A shared center lane is only for vehicles turning left or making a U-turn, and drivers from both directions use it. You may cross its solid yellow line to enter it, but only when it is safe.